Filter
Top Products
888-60-182P-01 rev.D • 01/07
17 of 22
7
a
Hold Rail against wall and start
screws with washers.
b
Tighten screws with 13mm socket
head (power tool is recommended)
in the following sequence: 1st-lower
right; 2nd-upper left; 3rd-lower left;
4th-upper right.
DO NOT OVERTIGHTEN SCREWS!
For solid concrete applications, torque
screws to 60 in-lbs (6.8 N m).
Screws must be fully seated in order to
support applied load!
The minimum torque for screws in
solid wood studs is 60 in-lbs minimum
(6.8 N m)while the maximum torque is
82 in-lbs (9.3 N m).
7
a
ᇚ䔼䘧䴴ຕ
䜡ড়ൿᓔྟᮟ䕀㶎ϱ
b
⫼PPⱘ݁㾦㶎ϱߔ
㤤Փ⫼⬉ࡼᎹ˅ᣝ✻ҹϟℹ偸
ᮟ㋻㶎ϱ˖
ϔ˖ϟেѠ˖ϞᎺ
ϝ˖ϟᎺ˗ಯ˖Ϟে
ϡ㽕ᮟᕫ䖛㋻ʽ
ᇍѢ⹀∈⊹ˈᇚ㶎ϱᮟࠄ㣅ᇌ
⺙1P
㶎ϱᖙ乏ᅠܼࠄԡˈҹ֓ᬃᩥ䞡䞣ʽ
⹀㶎ᷧⱘ㶎ϱ᳔ԢⶽЎ㣅
ᇌ⺙1P᳔催Ў㣅ᇌ⺙
1P
7
a
࡞ࠍოߦߒઃߌߡޔࡢ࠶
ࠪࡖࠍ↪ߒࡀࠫߩ
ขࠅઃߌࠍ㐿ᆎߒ߹ߔޕ
b
OOߩ࠰ࠤ࠶࠻ࡋ࠶࠼㔚േ߇
ᅢ߹ߒࠍߞߡޔ
ᰴߩ㗅ᐨߢࡀࠫࠍ✦߹ߔԘฝ
ਅޔԙᏀޔԚᏀਅޔԛฝޕ
ࡀࠫߪ✦ߔ߉ߥࠃ߁ߦߒߡߊ
ߛߐޕ
ࠦࡦࠢ࠻ߦㆡ↪ߔࠆ႐วߪޔ
KPNDU0Oߩ
࠻࡞ࠢࠍਈ߃߹ߔޕ
ᒰߔࠆ㊀㊂ࠍᡰ߃ࠆߚߦߪޔࡀ
ࠫࠍቢోߦᝌߔࠆ
ᔅⷐ߇ࠅ߹ߔޕ
ᧁߦㆡ↪ߔࠆ႐วߩࡀࠫߩᦨዊ࠻࡞
ࠢߪKPNDU0Oߢޔᦨ
ᄢ࠻࡞ࠢߪKPNDU0O
ߢߔޕ