Filter
Top Products
888-60-182P-01 rev.D • 01/07
9 of 22
4
ATTACH BRACKETS TO DISPLAY
a
Place Display Brackets (with pre-de-
termined fasteners) on back of display:
(y) The display brackets
should be centered verti-
cally on the back of the dis-
play - the distance between
the top of the bracket (y1)
and the top of the display
should be the same as the
distance between the bot-
tom of the bracket (y2) and
the bottom of the display.
(x) The display brackets
should be mounted to the
outer-most hole sets or as
wide as the rail can support,
not to exceed 750mm
(29.5”) apart.
b
Tighten screws with at least six,
full, 360° revolutions*, but do not over
tighten; over tightening may cause
damage to display and/or brackets.
*
Six full turns will ensure a minimum
thread engagement roughly equal to the
diameter of the screw. For instance, if the
screw diameter is 8mm, the minimum
thread engagement is also 8mm.)
4
ᇚᬃᶊᅝ㺙ࠄᰒ⼎఼Ϟ
a
ᇚᰒ⼎఼ᬃᶊ⫼乘ࠊⱘ㋻
ӊ˅
ᬒ㕂Ѣᰒ⼎఼㚠䚼
(y)ᰒ⼎఼ᬃᶊᑨᔧ
ሙЁൖⳈᅝᬒ
ᰒ⼎఼ⱘ㚠䚼
ৡ⿄"
ᬃᶊⱘ乊䚼(y1)
ᰒ⼎఼ⱘ乊䚼
П䯈ⱘ䎱⾏ᑨᔧ
ᬃᶊᑩ䚼
(y2)Ϣᰒ⼎఼ᑩ䚼П䯈ⱘ
䎱⾏ᰃϔḋⱘDŽ
(x)ᰒ⼎఼ᬃᶊ
ᑨᔧᅝ㺙ࠄ
᳔䚼ⱘᄨ༫ˈ㗙䔼䘧㛑
ᬃᣕⱘᆑᑺ
ᆑᑺϡ䍙䖛PP
āDŽ
b
㟇ᇥᑺⱘᅠܼᮟ䕀
ᴹᢻ㋻㶎ϱˈԚϡৃ䖛ᑺᢻ㋻˗
䖛ᑺᢻ㋻Ӯᇍᰒ⼎఼
ঞᬃᶊ䗴៤ᤳᆇDŽ
*
݁ᅠܼᮟ䕀ህ㛑ֱ䆕
㶎㒍啓ড়㟈Ϣ㶎ϱⱘⳈᕘ
ⳌৠDŽ↨བˈབᵰ㶎ϱⱘⳈᕘ
ᰃPPˈ
㶎㒍啓ড়гᰃPPDŽ
4
ࡉࠤ࠶࠻ࠍ࠺ࠖࠬࡊࠗߦขࠅ
ઃߌࠆ
a
࠺ࠖࠬࡊࠗࡉࠤ࠶࠻ࠍ
೨ߦቯߒߚขࠅઃߌࡀࠫࠍ↪
ߒߡ࠺ࠖࠬࡊࠗߩⵣ㕙ߦ㈩⟎
ߒ߹ߔޕ
(y)࠺ࠖࠬࡊࠗࡉ
ࠤ࠶࠻ߪ࠺ࠖࠬࡊࠗⵣ
㕙ߢု⋥ᣇะߩਛᄩߦ
⟎ߔࠆᔅⷐ߇ࠅ߹ߔ
ࡉ
ࠤ࠶࠻ߩ┵(y1)ߣ࠺
ࠖࠬࡊߩ┵ߩ〒㔌
߇ޔࡉࠤ࠶࠻ߩਅ┵(y2)
ߣ࠺ࠖࠬࡊࠗߩਅ┵ߩ
〒㔌ߣหߓߦߥࠆࠃ߁⸳
ቯߒ߹ߔޕ
(x)࠺ࠖࠬࡊࠗࡉ
ࠤ࠶࠻ߪޔ৻⇟ᄖߩⓣ
߹ߚߪ࡞߇ᡰ߃ࠄ
ࠇࠆ㒢ࠅᐢߊOO
̍ࠍㆊߒߥ
ขࠅઃߌߡߊߛߐޕ
b
qߢዋߥߊߣ߽࿁ォߐߖ
ߡࡀࠫࠍ✦߹ߔޕߚߛߒޔ✦ߔ
߉ߥࠃ߁ߦߒߡߊߛߐޕ࠺ࠖࠬ
ࡊࠗ߅ࠃ߮߹ߚߪࡉࠤ࠶࠻ߩ
⎕៊ߩේ࿃ߣߥࠆ႐ว߇ࠅ߹ߔޕ
*
ቢోߦ࿁ォߔࠆߣޔࡀࠫጊߩ
ᦨዊߩ߆ߺว߇ࡀࠫߩ⋥ᓘߣᄢ
หߓߦߥࠅ߹ߔޕ߃߫ޔࡀࠫߩ⋥
ᓘ߇OOߩ႐วޔࡀࠫጊߩᦨዊ߆
ߺว߽OOߦߥࠅ߹ߔޕ