Filter
Top Products
DVD
Lip sync
This function allows you to adjust the synchronization of the
video and audio portions of a DVD.
Press the LIP SYNC button to display the current lip sync value
(default is 0). Use the left and right cursor buttons to adjust
the value. Positive values mean that the sound is delayed
relative to the picture.
<
Press LIP SYNC again to cancel this setting. Any other
operational display appearing on screen will also cancel this
setting. Note that lip sync should be cancelled if you need to
use the left and right cursor buttons to navigate menus, etc.
<
The lip sync value you set is stored when you turn the unit
off, and will be remembered next time you turn the unit on
again.
<
This function has an effect on the signals output from the
following terminals:
AUDIO OUT, HDMI
<
When using the HDMI terminal, set Dolby Digital, DTS and
MPEG Audio of “Audio Digital Out” setting to “PCM” (see
page 39).
24
Display dimming
DVD VCD CD SA-CD DVD-A
The display on the main unit can be dimmed to suit the
environment in which you listen to music or watch video.
Use the FL DIMMER button to cycle between these
settings.
FL Dimmer3:
Full brightness
FL Dimmer2:
Medium brightness
FL Dimmer1:
Minimum brightness
OFF:
The display and indicators are off.
FL DIMauto (FL Dimmer Auto):
The display and indicators are off during playback. They turn
on with the minimum brightness in the stop mode.
<
Note that the OFF setting is not memorized when the power
is turned off. When the unit is switched off with the display
off, and then turned on again, the display is reset to the
minimum brightness (FL Dimmer1).
<
In OFF mode and FL DIMauto mode, when you press a button
such as PAUSE, the illuminations turn temporarily on.