EverFocus 810M DVR User Manual


 
(5) CALL MON QUAD SEQ: The retention period of the call monitor quad display in the
sequence mode.
Note: Please refer to CALLsetting for an advanced call monitor setting.
(6) LANGUAGE:
Note: Three languages are available to be chosen: English, Chinese and Japanese. Subject to change
without further notice. Please consult your sales representative for the most update information.
(7) QUICK PLAY: Set up the start play time of the normal play mode.
ON: Enable quick play. The video played time is the immediate play time from now.
OFF: Disable quick play. Videos will start to be played from the end point of the last play.
TIME: Quick play time, from 00:00 to 59:59. The default value is 10 minutes.
Note: The recommendatory quick play time is 10 minutes. The video cannot be played due to
the video file is not stored to HDD yet if you set a quick play time too short.
(8) SYSTEM PASSWORD ENABLE :
YES: Select YES to enable the password function.
NO: Select NOto disable the password function.
(9) PASSWORD and RIGHTS :
The login passwords here are used to operate and set up this machine. The different login passwords
indicate the different level of users, and no login name is necessary.
The digit will show up instead of a sign when the cursor is moved on it. Dial the Jog to change
the digit on which the cursor is located of the password, and press ENTER/DISPLAYto go
next/last digit. The available digits are 1, 2, 3, 4, 5, 6, 7, and 8.
There are three system access levels and one none access level. The below chart on the next page
shows the rights of each level.
Note:If the passwords of different levels are set the same, you willenter a higher level when you
login. For example, you will login to the ADMINISTRATOR level if the password of
ADMINISTRATOR and GENERAL levels are the same.
57