Filter
Top Products
MENU
51
PTZ-CONTROL WITH WEB BROWSER (from FW 1.09 only)
If the checkbox "PTZ CONTROL" is activated in the Web’s applet of the EDSR600/900/1600,
the screen shows the telemetry control functions.
Please consider the time delay in video network transmission at manual PTZ control!
PTZ network control is not recommended for ISDN or analogue transmission lines due to
slow video transmission rate and long video delay.
Control buttons:
1. PTZ CAMERA: Camera selection
2. REACTION METHOD: Reaction method of PTZ keys
Continuous- commands send permanent if
button is pressed
Step x 10 - 10 command / key press
Step x 5 - 5 command / key press
Step x 1 - 1 command / key press
3. Arrow keys: Control of pan / tilt
4. Z+ / Z-: Zoom function Z+: tele, Z-: wide
5. Focus: manual focus NEAR or FAR
6. IRIS: manual iris control INC: open iris
DEC: close iris
7. PRESET: Preset selection
SET: Storing of current PTZ position
CLR: Deleting of selected preset
GO: calls the selected preset position
8. SEQ.*: Preset tour
1 ~ 60 sec.: Dwell period between presets in
tour
RUN: Start preset tour
STOP: Stop preset tour
9. AUTO PAN**: Automatic Pan – function
Low-Fast: AUTO PAN speed
RUN: AUTO PAN Start
STOP: AUTO PAN Stop
* function not supported for ED2250 with PELCO - P Protocol
** function not supported for ED2250