Farenheit Technologies MD-1120CM DVD Player User Manual


 
DVD Functions
Eject
Audio
Change the audio output format.
(A the disc supports available audio
type.)
vailable only if
20
[DVD]
Changes the audio output format.
(Available only of the disc supports available audio
type.)
[VCD]/[AUDIO]
OSD CONDITION
Mute
Mute
Muteoff
Muteoff
Vol+/Vol-
Use these buttons to adjust the audio output level of the speaker from 0 to 20.
Mute
Press MUTE to turn off the audio part of the
currently playing program. Press it again to
return the audio volume to the level at which
you were last listening.
OSD CONDITION
PlayDisc
Pause
Play or Pause( )
When this button is pressed, the disc is ejected. When this button is pressed for more
than 3 seconds, the disc is unconditionally ejected. So, you can use this function when
you encounters not ejected situation due to unknown reasons.
An invalid button press.
[MP3]
OSD
CONDITION
2Channel
5.1Channel
1/2:Ac32CHEnglish
2/2:Ac35.1CHEnglish
OSD
CONDITION
Stereo
MonoLeft
Stereo
MonoLeft
MonoRight
MixMono
MonoRight
MixMono
Whenever this button is pressed, the mode
switches from pause to play or play to pause.
DVD Setup
Preference
1. TV Type
Choose the proper TV format appropriate to the
monitor you have connected to the player from
the following: NTSC, PAL or Multi type.
1. Press the SETUP button during stop mode.
2. Press the / buttons to move to Preference.
3. Press the / buttons to move to TV Type.
4. Press the ENTER button.
5. Press the / buttons to select TV Type.
3. Audio
Use the audio language menu to select the subtitle
language that you prefer. If the disc you are playing
has that language available, it will display subtitles
in that language.
1. Press the SETUP button during stop mode.
2. Press the / buttons to move to Preference.
3. Press the / buttons to move to Audio.
4. Press the ENTER button.
5. Press the / buttons to select desired
audio language.
17
Subtitle
PreferredAudioLanguage
PreferredAudioLanguage
PreferencePagePreferencePage
French
German
Italian
French
German
Italian
Spanish
Portuguese
Russian
Chinese
Spanish
Portuguese
Russian
Chinese
TVType
Parental
TVType
Parental
NTSC
English
Default
Audio
ENG
Audio
Subtitle
ENG
SetTVStandard
SetTVStandard
PreferencePagePreferencePage
Default
PAL
Multi
NTSC
TVType
Parental
TVType
Parental
NTSC
The Parental Control settings limit the player to only play content at or below a certain
movie rating. The ratings systems in different countries vary. In the USA, the Motion
Picture Association ofAmerica(MPAA) rates movies as G, PG, PG-13, etc.
In this menu item, you can set what is the highest level of rating you wish to allow the
unit to play.
1. Press the SETUP button when stop mode.
2. Press the / buttons to move to Preference.
3. Press the / buttons to move to Parental.
4. Press the ENTER button.
5. Press the / buttons to select desired
parental level.
2. Parental
Audio
Subtitle
ENG
SetParentalControl
SetParentalControl
PreferencePagePreferencePage
TVType
Parental
TVType
Parental
NTSC
1KIDSAF
2G
3PG
4PG13
5PGR
6R
7Nc17
8ADULT
1 KIDSAF
2
G
3
PG
4
PG13
5 PGR
6
R
7
Nc17
8
ADULT
Default