Farenheit Technologies TID-360T TV Receiver User Manual


 
Page-22
Video Setup:
Brightness
With this menu item you can set up the brightness of the
image.
Contrast
With this menu item you can set up the contrast of the image.
Hue
With this menu item you can set up the hue.
Saturation
With this menu item you can set up the color saturation.
Sharpness
With this menu item you can set up the sharpness of the image.
Digital setup
Dynamic range
This function is to obtain different compression results of the audio
signals, default is set to “OFF”.
If select FULL, the max audio signal is minimum.
Dual mono
With this menu item you can select the type of Left and Right
channel audio output. Stereo is normal Stereo, Mono L is all
sound on the Left Audio output, Mono R is all sound on the
Right channel. The “Mix Mono” function only works when a DVD is being played in DTS 5.1 mode.
Other functions
Subwoofer
Connect the subwoofer to the unit using sub output (see electrical diagram). Press MENU button,
choose expert and set subwoofer ON to enable subwoofer.
Anti-theft system
Remove the panel
1. Press the PWR button to turn the power off.
2. Press OPEN button to detach the panel.
3. Pull the panel out.
4. Place the panel into the case and take it with you when you leave the car.
Remove the unit
1. Remove the panel and the trim plate.
2. Insert both T-Keys into hole on the front of the set until they lock.
3. Pull out the unit.