Fisher FVH-E439 VCR User Manual


 
ON-SCREEN MENU
Your new VCR is designed with user-friendly on-screen
menus to help you operate its many features.
Color-coded menus prompt you step-by-step through
operations by highlighting the sections awaiting your
entries.
Displaying the On-Screen Menus
1 Turn on the power (TV and VCR).
2 Set the TV to channel 3 or 4.
3 Press the VCR button on the remote control to select
the VCR operation mode.
4 If the VCR indicator is off, press the TV/VCR button
on the remote control.
The VCR indicator lights.
NOTE: If the initial setup has not yet been
completed, the “Auto Setup” message will appear.
Follow steps 57 under “INITIAL SETUP” on page
15.
5 Press the MENU button on the remote control.
The main MENU appears.
@@@@@@@@@MENU
Menu title
Timer@program
Option
selected
VCR@setup
Clock@set
Language@select
Rec.List@super
Auto@tuning@memory
[CH§‡]†Select
Operations
indications
[SET]†OK@@@@@@[MENU]†TV
The menu items are color-coded as shown below:
œ Menu title: On magenta background
œ Option selected: Highlighted in green
œ Operations indications: On blue background
œ Others: On gray background
NOTE: If the clock has not yet been set, the Clock
set menu appears. To set the clock, see “SETTING
THE CLOCK” on page 20.
Press the
CH/TRACK
l
(or
j
) button to select the
desired option, then press the
SET
button.
6 Press the MENU button to exit the menu.
Main Menu Options
Reference pages are shown in square brackets.
Timer program [31 – 34]
œ Select this to program, check or cancel a timer
recording setting.
VCR setup [19]
œ Select this to set the VCR functions.
Clock set [20, 21]
œ Select this to set the clock or change the clock
setting.
Language select [22]
œ Select this to change the on-screen language.
Rec. List super [26, 27]
œ Select this to list the recordings on the tape
inserted in the VCR.
Auto tuning memory [22]
œ Select this to program the channels into the VCR’s
tuner memory.
BASIC OPERATION
SU4/UF2 (FVH-E439 GB) Tue. Feb. 09/1999
18