Filter
Top Products
COPYING A TAPE
You can copy recordings (such as home videos) from one
tape to another using two VCRs.
1 Connect the VCRs as shown.
2 Insert the recorded cassette into VCR 1.
3 Insert a blank tape into VCR 2.
4 Set the desired recording speed on VCR 2.
5 Turn on the TV and set it to channel 3 or 4.
If you use this model as VCR 2 to record:
œ Press the INPUT button on VCR 2 to select the rear
input jacks.
The AV indicator “L1” is displayed instead of a channel
number.
6 Press the TV/VCR button on VCR 2 to select the
VCR mode.
7 Place VCR 2 in the record/pause mode.
8 Press PLAY on VCR 1.
9 When the tape in VCR 1 has reached the desired
point, press (release) PAUSE/STILL on VCR 2.
Recording begins.
F Press STOP (or STOP/EJECT on the front panel) on
both VCRs when finished.
MAINTENANCE
Head Care and Cleaning
œ Under normal conditions, the heads should not require
cleaning. If you suspect a problem, contact a
factory-authorized service center.
Cabinet Cleaning
œ Clean the outside of the cabinet with a clean, soft cloth,
moistened with lukewarm water and wrung dry.
DO NOT USE SOLVENTS OR OTHER TYPES OF CLEANSERS. THESE CHEMICALS CAN CRACK OR
DISCOLOR THE CABINET.
VIDEO
TO TV
OUT
IN
AUDIO
VIDEO
OUT
AUDIO
VCR 1:
To play back
VCR 2:
To record
Audio connection cable
(not supplied)
Video connection cable
(not supplied)
TV
SU4/UF2 (FVH-E439 GB) Tue. Feb. 09/1999
37