Fisher ICR-B50 DVR User Manual


 
17
VOICE ALARM TIMER
1. Press the n button to turn the power on.
2. Select the sub-menu ALARM of FOLDER. (See SELECTING THE
MENU MODE.) FOLDER ALARM appears.
3. Press the n button to return to the original display mode.
4. Press the c or d button to select the file number (01/02 or 02/02).
5. Press the m button to record your alarm message.
6. Press the n button to stop.
7. Press the TIME/SET button. OFF or ON blinks.
8. Press the c or d button to select ON. or appears.
9. Press the TIME/SET button. The year display blinks.
10. Set the timer ON time by using the TIME/SET, c or d button. (Refer
to Adjusting the date and time.)
11. Press the MENU button to select the other folder as desired. (See
SELECTING THE MENU MODE.)
When the alarm ON time arrives, the voice alarm will be activated as shown
below:
At stop mode:
Beep 1 time & Voice message (If voice message is recorded.)
Beep 10 times (If no voice message is recorded.)
During playback mode:
The operation is the same as At stop mode as above. And, it goes back to
the previous point and pauses.
During recording mode:
Beep 1 time (Recording will not be interrupted.)
At power off mode:
Beep 1 time & Voice message (If voice message is recorded.)
Beep 10 times (If no voice message is recorded.)