Fisher PLC-XU55 CRT Television User Manual


  Open as PDF
of 56
 
40
Setting
This function is used to reset the lamp replace counter. When
replacing the projection lamp, reset the lamp replace counter by
using this function. See page 44 for operation.
Lamp counter reset
Remote control
This projector provides eight different remote control codes (Code 1-
Code 8); the factory-set, initial code (Code 1) and the other seven
codes (Code 2 to Code 8). This switching function prevents remote
control interference when operating several projectors or video
equipment at the same time.
For example operating the projector in “Code 7”, both the projector
and the remote control must be switched to “Code 7”.
To chanD 31 0 10 57.u10rhfss(equipment 259 Do1sifferentmust be switched tt92.0 10 57.60 0 0 1 12sp66 Tm0 0 0 1 k0.0219 Tw(This projector pr125.00.03 4ver189sce st be switched tt92.0 10 57.60 uID86anD 31 0 10 57.ration.mf*BT/F5 1 Tnw 0 12W ectors 5/ntmu42Wroj16rol projector r viWroj16rol projector r vame84 pr34l5 1 Tnwpr16o)Tj0 -1 2rolst4es99 Td. 1 Tnw 0 12W ectors 5/ntmu42Wroj16rol projector r viWroj16rol projector r vamTjTr by)TjT*-0.0001 Tc0 Tw(using this function. See page 44 for operation.).ua22s29oer by
 previous next