Filter
Top Products
• While pushing down on the seat, insert the seat pin
through the hole in the seat and into a seat mount
adjustment hole.
Seat Pin
➥
• Insert the knobbed end of the
footrest up through the opening in
the underside, center of the frame .
• Rotate the footrest
1
/
4
turn .
• Slide the footrest toward the handle-
bar as far as it will go until the top of the footrest is
positioned over the opening’s rectangular cut-out.
• Lower the knobbed end of the footrest into the rectangular
cut-out in the frame .
Assembly
Assembly
12
Frame Opening
Footrest
Knobbed End
Footrest
Top View
Knobbed End
7
7
•
Place the frame cover over the frame opening. Make
sure the holes in the frame cover align with the holes
on the frame.
• Insert three #10 x
3
/
4
" screws into the frame cover
and tighten.
13
Frame Cover
• Place the seat on the seat mount.
• Adjust the seat for your child’s comfort by aligning the hole
in the seat with one of the seat mount adjustment holes.
2
➥
➥
1
2
3
1
3
Seat Mount Adjustment Holes
Seat
Seat Mount
14
15
B2488 RRR Trike Deluxe 4/17/03 2:07 PM Page 7