Filter
Top Products
2. Timer Service: Select between Channel or
Record. If Channel is selected, the Wakeup
Channel is displayed in the following item. If
Record is selected, the Wakeup Message is
displayed in the following item.
3. Wakeup Date, On T ime: Use numeric keys to
input the valid date.
Duration: Set the gap time. After waking up, system will power off automatically
after the duration time.
Before entering into the Parental Lock window,
you need input the correct password. The
default password is 0000.
1. Menu Lock: Press keys to select
between O and On. If select "On" , you can not
enter into the window before entering the
password.
2. Channel Lock: Press keys to select
between O and On. The default value is O.
3.6 Parental Lock
If select "On", you can not view the locked channel set in Chanel List Edit window
until you have inputted the correct password.
3. New Password: User numeric key (0-9) to input the new password.
4. Conrm Password: Input the new password once again. Conrm password
must be the
same as the New password. System will inform you "Change password
successfully!" while they are the same, or inform you to input the password of
Conrm password once again when they are not the same.
3.5 Timer Setting
If there is no program, you can not enter into this
window. There are 8 timers that can be set.
Select Timer up or down, and press OK key to
enter into the setting window.
1. Timer mode: The default mode is of f. You can
set the timer once, daily and o.