Filter
Top Products
Freecom Mobile DVD RW Recorder
6
EN
1
Chapter 1: Start Up
Warning! Only connect the Mobile DVD RW Recorder via the USB or Firewire
port. Never use both ports at the same time!
1.1 Hardware installation
1. Connect the interface cable to the Freecom Mobile DVD
RW Recorder.
2. Connect the cable of the power supply to the Freecom
Mobile DVD RW Recorder and the power supply itself to
the socket.
3. Connect the interface cable to the interface port of your
computer.
Since USB 2.0 is backwards compatible with USB 1.1, the Freecom Mobile DVD
RW Recorder can be connected to all USB ports. When connected to a USB 1.1
port, however, the performance (data transfer rate) of the Freecom Mobile
DVD RW Recorder will be much lower than when the drive is connected to a
USB 2.0 port.