Fujitsu P42HCA10 Flat Panel Television User Manual


 
E-27
FEATURES setup screen has the following 4 options.
Adjustment : Can make a fine adjustment of pictures such as Dot Clock, Clamp Position.
On Screen Menu : Can make a display setting such as OSD, Language. (See P. E-28.)
Input Terminal : Can make an input terminal setting such as Video Input. (See P. E-28E-29.)
Others : Can make other settings. (See P. E-30E-33.)
Adjusting Dot Clock (Dot Clock) for RGB
You may find that pictures blur, depending on the clock frequency of your PCs processor.
If you experience blurring, you can obtain a clearer picture by adjusting the Dot Clock.
Use or to select a value between -60 and +60.
Press to store.
Adjusting Clock Phase (Clock Phase) for RGB
You may find that pictures blur, depending on the clock phase of your PCs processor. If you
experience blurring, you can obtain a clearer picture by adjusting the Clock Phase.
Use or to select "Auto" or "Manual".
Auto: Makes automatic adjustment.
Manual: Makes manual adjustment.
Use or to specify a value between 1 and 32.
Press to store.
Adjusting Clamp Position (Clamp Position) for RGB
Adjusts clamp pulse in accordance with the input signal received from connected equipment.
Use or to specify a value between -8 and 8.
Press to store.
Selecting the Optimum Dynamic Range of Images (Auto Calibration)
for RGB
Receives a white screen signal and adjusts the dynamic range of images to the optimum.
(1) Select Auto Calibration and press .
Auto Calibration screen appears.
(2) Select Execute and press .
Press or to select Yes or No.
Yes: Stores the data of Auto Calibration.
No: Disables the execution result of Auto Calibration.
(3) Press to execute.
When selecting Manual by Clock Phase
* On-screen information disappears if you do not take any action for about 60 seconds.
"Auto Calibration" setting screen
"Yes/No" screen to select
ADJUSTMENT
English
02.12.3, 10:40Page 27