Fujitsu P42HCA10 Flat Panel Television User Manual


 
E-8
1 OFF/STD-BY switch
OFF :
The power indicator lamp goes off, and the power can’t be turned on by the power button. The power is partly supplied.
STD-BY :The power indicator lamp lights red, and the power can be turned on or off by the power button.
2 RS-232C terminal (RS-232C)
This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.
When connecting a cable, attach a ferrite core to the cable. (See P. E-13.)
3 RGB1 input terminal (RGB1 INPUT/mD-sub)
Connect this terminal to the PC’s display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.
4 Power input terminal
Connect this terminal to the power cable supplied with the display.
When connecting a cable,attach a ferrite core to the cable. (See P. E-13)
5 External speaker output terminal (EXT SP)
Connect this terminal to the optionally available speaker.
(When using other speaker than the optional one, use 4–16 speaker.)
When connecting a cable,attach a ferrite core to the cable. (See P. E-13)
* See the speaker instruction manual for more information.
* P42VCA11/P42HCA11/P50XCA11 only.
PART NAMES AND FUNCTIONS (Continued)
Bottom (42” VCA type)
Bottom (50”)
Bottom (42” HCA type)
02.12.3, 10:34Page 8