Fujitsu P42HCA10 Flat Panel Television User Manual


 
E-33
English
Setting Exhibition Mode (Exhibition Mode)
You can use this option to display the enhanced contrast, which is most suitable for the use by
unspecified persons.
Each time you press or , one of the available choices appears in the following sequence:
On Off
On: Sets up Exhibition mode.
Off: Sets up normal mode.
Press to store.
* In Exhibition mode, the display returns to the original setting in about 5 minutes even if the
adjustment is changed.
* The setup will be cancelled when removing the power plug from the receptacle.
Horizontal/Vertical installation (Installation)
You can use this option to setup the number of fan rotation and the direction of display text of menu
or other screen for horizontal and vertical installation.
Each time you press or , one of the available choices appears in the following sequence:
-90 Deg. :
Displays text from left to right when the display is installed with the power indicator lamp at the top.
Normal : Displays text normally.
+90 Deg. :
Displays text from left to right when the display is installed with the power indicator lamp at the bottom.
Press to store.
* Be sure to make this setup when changing the direction of installation.
Displaying System Status (Information)
Displays system operation status.
Select Information and press .
The Information screen will appear.
Mode: Input mode
Monitor No.: Monitor number
Freq. Scan Mode: Frequency scanning
Input Signal: Video mode
Input Sync.: Signal type
Freq.: Frequency and polarity (fH, fV)
Preset No.: RGB code number
Information screen (Video Input Mode)
Information screen (RGB2 Input Mode)
* On-screen information disappears if you do not take any action for about 60 seconds.
03.1.20, 13:20Page 33