Fujitsu P42HHA10E Flat Panel Television User Manual


 
English
E-15
VCR
Connect the video signal cable to the SCART terminal. (When the P-TE1000E is installed.)
Connect the video signal to either the S-video input terminal or the video input terminal. (When the P-TE1010E is installed.)
To SCART output
To SCART input
An example of the underside of the display
(with the P-TE1000E installed in the P42VHA10)
Note
Unplug the power cord from the AC outlet before you connect external components.
Also refer to the instructions for the component to be connected.
When inputting audio, connect to the terminals corresponding to the used video input or RGB input.
An example of the underside of the display
(with the P-TE1010E installed in the P42VHA10)
To video output
To S-video output
To audio output
To video inputTo S-video inputTo audio input
03.1.16, 11:50Page 15
Downloaded From TV-Manual.com Manuals