Fujitsu P42HHA10E Flat Panel Television User Manual


 
E-8
PART NAMES AND FUNCTIONS (Continued)
DISPLAY SECTION LOWER PART
1 /I power switch
When pressed while in the OFF state, the power indicator lamp lights and the display is placed in the ON state, and the power can be turned
ON or OFF by the remote control or on the control panel of the display. When pressed while in the ON state, the power indicator lamp goes
out and the display is placed in the OFF state where power is still partly supplied.
2 RS-232C terminal (RS-232C)
This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.
When connecting a cable, attach a ferrite core to the cable. (See P. E-13.)
3 RGB1 input terminal (RGB1 INPUT/DVI-D)
Connect this terminal to the PCs display (digital RGB) output terminal.
*The connection cable No.88741-8000 made by molex Inc. is recommanded.
4 RGB2 input terminal (RGB2 INPUT/mD-sub)
Connect this terminal to the PCs display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.
5 Power input terminal
Connect this terminal to the power cable supplied with the display.
When connecting a cable, attach a ferrite core to the cable. (See P. E-13.)
6 External speaker output terminal (EXT SP)
Connect this terminal to the optionally available speaker.
When connecting a cable, attach a ferrite core to the cable. (See P. E-13.)
*See the speaker instruction manual for more information.
7 Audio3 input terminal (AUDIO3 INPUT)
8 Audio2 input terminal (AUDIO2 INPUT)
9 Audio1 input terminal (AUDIO1 INPUT)
Connect this terminal to the sound output terminal of your VCR, etc. (See P.E-38 for the selection of audio input for video input.)
Bottom (P42VHA10 type)
Bottom (P42HHA10 type)
Bottom (50)
Videoboard
P-TE1000E type P-TE1010E type
Bottom (P42VHA20 type)
03.1.16, 11:49Page 8
Downloaded From TV-Manual.com Manuals