Fujitsu P42HTS51E Flat Panel Television User Manual


 
E-35
EnglishDeutschEspañolFrançaisItalianoPortuguês
日 本 語
Póññêèé
中文
Adjusting the Color Temp.
“Color Temperature” can be set.
Each time E or F is pressed, the color temperature mode is switched as shown below.
[Warm]: More reddish colors
[Cool]: More bluish colors
Press < to store.
Setting Picture Memory
The adjustment status of eight groups of picture adjustment settings can be stored, enabling you to
quickly switch to your desired group of settings for the picture you are planning to watch.
[Save]: Use
C or D to select Memory 1 - 8. If < is pressed, the current picture adjustment
values are stored to the selected Memory.
[Load]: Use
C or D to select Memory 1 - 8. When < is pressed, the values becomes the picture
adjustment values stored in the selected Memory.
Picture Memory Selection Screen
“Save” Selection Screen
“Load” Selection Screen
Note
The screen display disappears if there is no operation within approximately 60 seconds.
Depending on the model or the optional devices, some of the functions may not be available.
The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
MHD01862_E.book 35 ページ 2005年11月25日 金曜日 午後8時54分