Filter
Top Products
E-40
OTHER ADJUSTMENTS (Continued)
• Selecting the settings of Video Input terminal (VIDEO1-4)
Select the video input format.
Each time EF is pressed, the setting is switched.
Press < to store.
* RGB input is not made to Video 3.
Video Format
You can use this option to select the video format appropriate for the input signal.
Each time you press
E or F, one of the available modes appears in the following sequence:
[Auto1]: Automatically selects NTSC, PAL and SECAM.
[Auto2]: Automatically selects NTSC and M-PAL.
[Other than Auto]: You need to select a system appropriate to the input signal.
Press
< to store.
Press C or D to select the items for setting. It is switched as shown as below.
Press < to proceed to the next step.
Auto Store
Press E or F to select the country or region, and then press <.
All the channels are scanned, and only the channels that can be received are assigned to the Program Nos.
* Several minutes are required to scan all the channels. To cancel the operation in progress, press ;.
* See page E-47 for the selectable TV frequencies.
Manual Store
Press E or F to select the Program No. to be stored.
Press
C
or
D
to select the Manual Store items to be set (Setting or Name). Press
<
to proceed.
Setting
Press
C or D to select the setting item.
•Freq.
Each time
E or F is pressed, the TV frequency is switched.
• System
Each time E or F is pressed, the TV SYSTEM is switched.
SETTING THE INPUT TERMINALS
CHANNEL SETTING
Input Terminal Settings Screen
Channel Settings Screen
MHD01862_E.book 40 ページ ２００５年１１月２５日 金曜日 午後８時５４分
Downloaded From TV-Manual.com Manuals