Filter
Top Products
E-41
EnglishDeutschEspañolFrançaisItalianoPortuguês
日 本 語
Póññêèé
中文
•Adjust
Each time
E or F is pressed, the fine-tune adjustment for Tuning is switched.
•Skip
This function specifies whether or not to use the Skip function for the displayed Program No.
Each time E or F is pressed, the setting is switched.
Off < On
[Off]: The Skip function is not available when Channel Up/Down has been selected.
[On]: The Skip function is available when Channel Up/Down has been selected.
Press
< to store.
* Select [On] when you want to skip the channels that they are not broadcasting programs.
Name
An eight-character name can be specified for each Program No.
Press
E or F to select the character input position, and C or D to switch through the characters.
When the input is completed, press < to store.
* When switching the programs, etc., the OSD becomes the indication by the stored name.
Sort
This function sorts the name, the data and the contents of stored programs.
Press C or D to select To (edit destination)/From (edit source), and E or F to switch the Program No.
Press < to store.
Auto Off-NO SIG.
You can make to the standby state automatically when the no signal state continued during set up time.
Press
C D to select the “Time”.
Press E F to select the amount of time before the standby state starts.
Press < to store.
* The numerical value is the approximate amount of time before the standby state starts.
You can assign the black or white color for the background color at the no signal state.
Press C Dto select the “Background”.
Press E F to select the displayed background displayed.
Black < White
Press < to store.
* The background color changes to assigned color state after approximate 20 seconds at the no signal state.
OTHER SETTINGS
Auto Off-NO SIG. settings
screen
Note
• The screen display disappears if there is no operation within approximately 60 seconds.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
MHD01862_E.book 41 ページ ２００５年１１月２５日 金曜日 午後８時５４分
Downloaded From TV-Manual.com Manuals