Filter
Top Products
E-16
ADJUSTING THE PICTURE
• Picture-related items can be set and adjusted in the Picture Adjustment Screen. See BASIC PROCEDURES OF ADJUSTMENT MENU
on page E-15 for the basic procedures.
Adjusting the Signal Contrast
Press
F to increase the input signal contrast.
Press E to reduce the input signal contrast.
Press < to store.
Adjusting the Drive Contrast
Press F to raise the display’s luminance level, and increase the contrast.
Press E to lower the display’s luminance level, and reduce the contrast.
Press < to store.
* If Ambient Sensor is ON, the change made by this adjustment may be difficult to be recognized in too bright or dark a place.
Adjusting the Brightness
Press F to increase the brightness.
Press E to reduce the brightness.
Press < to store.
Adjusting the Color
Press F to darken the color.
Press E to lighten the color.
Press < to store.
Adjusting the Tint
Press F to change the tint to a more greenish color.
Press E to change the tint to a more purplish color.
Press < to store.
Adjusting the Sharpness
Press F to sharpen the Sharpness.
Press E to soften the Sharpness.
Press < to store.
Adjusting the Ambient Sensor
Ambient Sensor can be set.
Automatically adjusts the picture quality to an optimized level that matches the brightness of the ambient light.
Each time E or F is pressed, the setting is switched.
<
On
<
Off <
Press < to store.
7527_E.book 16 ページ ２００６年９月５日 火曜日 午後９時３５分