Filter
Top Products
–
12
–
EN
VCR Functions
1
Press [MENU], then select “TIMER PROGRAMMING”.
2
Select an empty program number.
Then press [B] to go to next step.
3
Select “ONCE”, “DAILY” (Mon-Fri), or “WEEKLY”.
Then press [B] to go to next step.
2
Press [B] for
“AUTO REPEAT”, “ON” or “OFF”.
4
Select the desired date.
Then press [B] to go to next step.
5
Select the desired start time (hour).
Then press [B] to go to next step.
1 Insert a cassette with
tab into this unit.
2
Select the channel
to record.
3 Press [SPEED] to select the desired tape speed.
4 Press [RECORD] repeatedly to select the
desired recording length.
5 To stop recording 6 To eject the record-
ed cassette
• You can set a program one year in advance.
Recording
Accidental erasure prevention
To prevent accidental recording on a recorded
cassette, remove its record tab. To record on it
later, cover the hole with adhesive tape.
SP
REC
Type of tape
T60 T120 T160
SP mode 1hour 2hours 2-2/3hours
SLP mode 3hours 6hours 8hours
Recording/Playback TimeTape Speed
123
456
789
0
REC OTR(0:30) OTR(1:00).....
(Normal recording)
OTR
(
8:00
)
OTR
(
7:30
)
STOP
OPEN/CLOSE
/EJECT
VIDEO AUDIO STANDBY-ON REW F.FWDSTOP/EJECT PLAY RECORD CHANNEL
OPEN/
CLOSE
VCR DVD
PREVSOURCE STOP
DISC INREC TIMER
IR
STANDBY-ON
DISPLAY VCR DVD PAUSE
SLOW
VCR/TV
SKIP/CH.
PLAY
STOP
RECORD
MENU
SETUP TOP MENU
ENTER
RETURN
OPEN/CLOSE
/EJECT
SPEED AUDIO
123
456
789
0
+10
1
5 6
5
4
SKIP/CH.
You CANNOT dub a DVD to a videotape.
To stop recording temporarily (Pause mode)
Press [PAUSE F].
• During the rec-pause mode, five C marks appear on the TV screen. Each C mark rep-
resents one minute.
• Press it again to resume recording.
• Pause mode will be automatically canceled after 5 minutes to prevent damage to
the tape and the video head.
Recording & OTR (One Touch Recording)
- M E N U -
TIMER PROGRAMMING
B AUTO REPEAT [ON]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
Auto Repeat
Hint
• To cancel Auto Repeat, follow step 1 above. Then, press [B] so that “OFF” appears beside “AUTO REPEAT”. Press [CLEAR/C.RESET] to exit.
• If menu remains on the TV screen after step 2, press [CLEAR/C.RESET] to exit.
• The Auto Repeat playback will start automatically if you select “AUTO REPEAT” to “ON” in the stop mode.
or
PROGRAM NUMBER 1
DATE – – / – –
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
Timer Recording
Hint
• If you want to watch one channel while recording another...
1) If noise appears on the TV screen, press [VCR/TV] to put the unit in TV position.
2) You cannot record one channel while watching another if you have a cable box or satellite
receiver.
SPEED
RECORD
MENU
or
or
TIMER PROGRAMMING
PROG 12345678
DATE
START TIME
END TIME
CHANNEL
REC SPEED
1
Press [MENU], and choose
“AUTO REPEAT” during playback.
- M E N U -
TIMER PROGRAMMING
B AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
MENU
or
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 1 0 / 2 2 MON
START TIME 0 7 : 3 0 – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
or
or
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 1 0 / 2 2 MON
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
Before: Turn on the TV and set it to channel 3.
• If channel 3 has been already occupied for broadcasting,
see “RF Output Channel” section on page 6.
- M E N U -
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
2
PROGRAM NUMBER 1
B ONCE
DAILY
WEEKLY
VCR
VCR
VCR
VCR
VCR
VCR
•
Insert a tape with its record tab into the unit.
4
2
or
or
Available program number flashes.
This function will playback a tape repeatedly from the beginning when the tape reaches the end.
Record tab
3 6
E8C1UCD_EN.indd 12E8C1UCD_EN.indd 12 2007/04/03 9:49:072007/04/03 9:49:07