Filter
Top Products
16
EN
O
PTIONAL SETTING
Picture Adjustment
You can adjust brightness, contrast, color, tint and sharpness.
1
Press [MENU] to display the main menu.
MENU
2
Use [CH K / L] to select “PICTURE”, then press [VOL X].
e.g.) digital TV mode
or
CH
CH
VOL
- TV SETUP -
PICTURE
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE [ENGLISH]
CAPTION [OFF]
DTV SETUP
3
Use [CH K / L] to select the picture quality type you
want to adjust.
or
CH
CH
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
4
Use [VOL X / Y] to adjust the quality.
or
VOL VOL
Selection
[VOL Y] [VOL X]
BRIGHT to decrease brightness to increase brightness
CONTRAST to decrease contrast to increase contrast
COLOR to decrease color to brighten color
TINT to add red to add green
SHARPNESS to make soft to make clear
5
Press [MENU] to exit.
MENU
Note:
• The picture adjustment setting display will automatically
disappear in a few seconds.
5
Closed Caption
You can view closed captioning (cc) for TV programs, movies and news.
Closed caption refer to text of dialogue or descriptions displayed on-screen
for the hearing impaired.
1
Press [MENU] to display the main menu.
MENU
2
Use [CH K / L] to select “CAPTION”,
then use [VOL X / Y] to change the setting.
e.g.) digital TV mode
- TV SETUP -
PICTURE
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE [ENGLISH]
CAPTION [OFF]
DTV SETUP
or
CH
CH
or
VOL VOL
OFF
CAPTION1
CAPTION2
CAPTION3
CAPTION4
TEXT1
TEXT2
TEXT3
TEXT4
[Caption Mode]
CAPTION1 (C1) and TEXT1 (T1);
are the primary caption and text services.
The captioning or text is displayed in the same
language as the program’s dialogue
(up to 4 lines of script on the TV screen, where it does
not obstruct relevant parts of the picture).
CAPTION3 (C3) and TEXT3 (T3);
serve as the preferred data channels.
The captioning or text is often a secondary language.
CAPTION2 (C2), CAPTION4 (C4), TEXT2 (T2) and
TEXT4 (T4);
are rarely available and broadcasters use them only
in special conditions, such as when “CAPTION1” and
“CAPTION3” or “TEXT1” and “TEXT3” are not available.
• There are 3 display modes according to programs:
Paint-on mode: Displays input characters on the TV
screen immediately.
Pop-on mode: Once characters are stored in
memory, they are displayed all at
once.
Roll-up mode: Displays the characters continuously
by scrolling (max. 4 lines).
5
P7157UT_CR202TT9_EN_v2.indd 16P7157UT_CR202TT9_EN_v2.indd 16 2008/07/14 15:26:052008/07/14 15:26:05