FUNAI DRV-B2734 DVD VCR Combo User Manual


 
65
VCR functions
EN
Other operations
Press [VCR] first.
To cue or review picture during playback (Picture
Search):
Press [FWD f] or [REW r] during playback.
Press it again and the unit will search in super high
speed.
To freeze the picture on TV screen during
playback (Still mode):
Press [PAUSE p]. Each time you press the button,
the picture will be forwarded frame by frame.
If the picture begins to vibrate vertically during the still
mode, stabilize the picture by pressing the
[PROG. U / D].
If the picture is distorted or rolling vertically, adjust the
vertical hold control on your TV, if equipped.
Counter Reset:
Press [CLEAR].
To play back in slow motion:
Press [SLOW] during playback or the still mode.
If the noise bars appear on the TV screen, you can
reduce it by pressing [PROG. U / D].
Note
Still / Slow / Pause mode will be automatically
cancelled after 5 minutes to prevent damage to the
tape and the video head.
To return to play back from the Picture Search / Still /
Slow mode, press [PLAY P].
Hi-Fi Stereo Sound System
This unit will record and playback Hi-Fi stereo sound.
This unit will receive stereo and bilingual broadcasts
and it is possible to record in several ways and to play
back the sound.
Selecting the Sound Mode
You can select each mode by pressing [AUDIO] on
the remote control. Each mode is indicated on the TV
screen as following.
During reception of bilingual broadcasts
Note
If you play back non-Hi-Fi tapes, the unit will play
back automatically in monaural even if you select
any mode.
If the stereo signal becomes weak, the broadcast is
automatically recorded in monaural.
VCRVCR
Mode Audio output
Display on
the TV screen
Main Main audio from the both
speakers
Main
Sub Sub audio from the both
speakers
Sub
Main /
Sub
• Main audio from the left
speaker
• Sub audio from the right
speaker
Main
Sub
DRV_B2737_B2734.book Page 65 Thursday, March 31, 2005 10:04 PM