FUNAI DRV-B2734 DVD VCR Combo User Manual


 
9
Before you start
EN
Rear Panel
1 Mains cable
Connect to a standard AC outlet.
2 AV2 (DECODER) (DVD/VCR)
Connect to VCR, camcorder, or other
Audio-Video equipment. Use a commercially
available Scart cable.
3 AV1 (TV) (DVD/VCR)
Connect to the Scart jack on your TV. Use the
supplied Scart cable.
4 DIGITAL AUDIO OUT (DVD) (OPTICAL
(DRV-B2737 only), COAXIAL) jacks
Connect to an amplifier with digital input jacks
such as a Dolby Digital decoder or DTS
decoder. Use a commercially available optical or
coaxial cable.
5 AUDIO OUT jacks (DVD)
Connect to the audio input jacks on your TV.
Use commercially available Audio cables.
6 S-VIDEO OUT jack (DVD)
Connect to the S-Video input jack on your TV.
Use commercially available S-Video cable.
7 AERIAL (DVD/VCR)
Connect to an antenna or cable.
8 RF OUT (DVD/VCR)
Connect to the Aerial jack on your TV, cable box
or direct broadcast system. Use the supplied RF
cable.
Note
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage
to the unit.
This unit does not have an RF modulator.
DVD/VCR
AV2(DECODER)
AUDIO
OUT
AERIAL
RF OUT
L
R
S-VIDEO
OUT
AV1(TV)
DVD
DVD/VCR
DIGITAL
AUDIO OUT
COAXIALOPTICAL
72134 5 86
*The unit is for the DRV-B2737.
DRV_B2737_B2734.book Page 9 Thursday, March 31, 2005 10:04 PM