FUNAI F20LCTE-A Flat Panel Television User Manual


 
CAPTION MODE
1) Closed Caption Characters can be displayed on
the TV screen only when the received broadcast
signal contains Caption Signals.
2)
Paint-on mode:
Displays input characters on the
screen immediately.
Pop-on mode: Once characters are stored in
memory, they are displayed all at
once.
Roll-up mode: Displays the characters
continuously by scrolling (max. 4
lines).
Note: If [CAPTION1] or [CAPTION2] is selected
but a Closed Caption signal is not included,
characters will not be displayed.
TEXT MODE
1) Displays the text on the screen by scrolling (max.
7 lines).
2) If the received broadcast signal does not contain
caption or text signals, no change will occur.
Notes:
•When your TV receives a special effects playback
signal (i.e., Search, Slow and Still) from a VCR’s
video output channel (CH3 or CH4), your TV
may not display the correct caption or text.
Captions and texts may not match the TV voice
exactly.
Interference may cause the closed caption system
not to function properly.
The caption or text characters will not be
displayed while the menu display or functions
display is shown.
If you see this screen:
If your TV displays a black box on the screen, this
means that your TV is set to TEXT mode. To clear
screen, select [CAPTION1], [CAPTION2] or [OFF].
5
The sleep timer function allows you to have the
POWER automatically turn off
after a set time period.
Press
POWER to turn on
the TV and press SLEEP
on the remote control .
You may change the sleep
time by pressing SLEEP on the remote control
repeatedly. The timer can be set up to 90
minutes. Each time SLEEP is pressed the time
increases by 10 minutes. (The timer display
counts up and sleep timer will be displayed on
the screen when you press SLEEP on the
remote control).
Note: When you disconnect the unit from the
AC outlet or when you have a power failure, the
sleep time will be lost.
TO CANCEL THE SLEEP TIMER
Press SLEEP repeatedly until “SLEEP 0 MINUTE”
is displayed.
2
1
- 10 - EN
OPERATIONS
SLEEP 10 MINUTE
: Press VOL or .
- TV SET UP -
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
TV SOUND [MAIN]
BACK LIGHT [BRIGHT]
- TV SET UP -
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [
CAPTION1
]
TV SOUND [MAIN]
BACK LIGHT [BRIGHT]
- TV SET UP -
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [
CAPTION2
]
TV SOUND [MAIN]
BACK LIGHT [BRIGHT]
- TV SET UP -
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [TEXT1]
TV SOUND [MAIN]
BACK LIGHT [BRIGHT]
- TV SET UP -
PICTURE
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [TEXT2]
TV SOUND [MAIN]
BACK LIGHT [BRIGHT]
WATCHING A TV PROGRAM
Press POWER to turn on the TV.
Select the desired channel with CH or.
Adjust the volume to the desired listening level
using
VOL or .
Adjust picture controls for a natural looking
image. (See “PICTURE ADJUSTMENT”.)
4
3
2
1
This TV can receive Caption and Text.
CLOSED CAPTION SELECTION
You may view specially labeled (cc) TV programs,
movies, news and prerecorded tapes, etc. with either
a dialogue caption or text display added to the
program.
Press MENU so that the set up menu appears on
the TV screen.
Press the CH orto point to “CAPTION”.
Press VOL or to select the mode you wish.
When done, press MENU to exit.
4
3
2
1
SETTING THE SLEEP TIMER
CLOSED CAPTION