Filter
Top Products
PROG. B
Actual
recording
When the recording time is entirely overlapped:
PROG. A will not be recorded.
PROG. A
PROG. B
Actual
recording
PROG. B PROG. A
When the recording time is partially overlapped:
PROG. A will start after PROG. B is complete to be recorded.
PROG. A
PROG. B
The first 20-90 seconds will be cut off.
ex.1
Actual
recording
PROG. A PROG. B
A programming set previously has priority
When the starting time is same:
A program set previously (PROG.A) has priority.
PROG. A
PROG. B
PROG. C
Actual
recording
PROG. A PROG. B
ex. 2
When some programming have been made at the end
time of the programming currently being recorded:
A program set previously (PROG. B) has priority.
The first 20-90 seconds will be cut off.
The first 20-90 seconds will be cut off.
PROG. A
PROG. B
Hints for timer recording
•
If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.
•
If a disc is not on the tray, the indicator flashes and timer recording cannot be performed. Please insert a recordable disc.
• When all the timer recording is completed, the indicator flashes.To play or eject the recorded disc, press POWER
button first, and then press PLAY
B or OPEN/CLOSE A button.
•
During timer recording or timer standby ( indicator is on the front display), any operations on the unit will not be
available.To make these operations available, cancel the timer recording or timer standby first ( indicator disappears).
• To cancel the timer standby mode, press POWER button.
• When the Start and the End time are the same, the length of the recording will be set for 24 hours.When the disc
reaches at the end during the recording, the DVD recorder turns itself off.
• When the programmed Start and End time are earlier than the current time, the recording will be set on the same
date in the next year.
• If your programmed Start time for DVD recording is within 2 minutes from the current time, the power will turn on
for recording standby right after you turn the power off.
This unit records the programs according to priority if the timer programmings are overlapped.The timer programming
set previously has priority.
A timer recording of lower priority will be canceled, start from the middle or stop on the way.
Check the overlapped timer programmings and change the priority if necessary.
The priority of overlapped settings
38
Timer recording (cont’d)
Recording
Note
Example:
When the end time of the programming currently
being recorded and the starting time of the one to be recorded
sequentially are same:
PROG. A
PROG. B
Actual
recording
The first 20-90 seconds will be cut off.
PROG. BPROG. A
• When the recording time
of two programs are
overlapped, or the End
time of a program and the
Start time of another is
the same, the first 20-90
seconds of the subsequent
program will be cut off.
E6550UD(EN_SP_FR).qx3 04.8.10 11:34 Page 38