Filter
Top Products
– 5 –
EN
1
Insert the prerecorded tape. The
VCP will turn on. If the safety tab has
been removed, the VCP will start
playback automatically.
2
Turn on the TV and set the TV to channel 3 or 4.
Now set the CH3/CH4 switch on the back of the
VCP to match the channel selected on the TV.
3
Begin playback by pressing [PLAY].
• Tracking adjustment will be set automatically (Digital
Tracking function) when you start playback. To adjust
the tracking manually, press [TRACKING ] on
the remote control.
• When a tape has reached the end, the VCP will
rewind the tape to the beginning, eject the tape, and
turn off the VCP automatically.
4 To stop playback, press [STOP].
(
)
You can freeze the picture on TV screen by pressing
[STILL] during playback.
• Usually there will be video "noise" lines (black and
white streaks or dots) on the screen. This is not a
fault of the machine but is a by-product of the
technology involved in producing a 2 Head VCP.
Only a tape recorded in the SLP mode will show a
clear picture.You can change position of the noise
lines on a still picture by pressing [STILL] repeatedly.
• After the VCP has been in Still mode for 5 minutes, it
will stop automatically to protect the tape and the
video head.
• To return playback, press [PLAY].
This feature allows you to play a tape over and over.
1 Press the AUTO REPEAT button.THE AUTO
REPEAT indicator lits.
To cancel the auto repeat mode, press the AUTO
REPEAT button again.The AUTO REPEAT indicator
goes off.
If you want to skip or repeat a scene during playback,
press [F.FWD] or [REW].
• Press it again and the VCP will now search in super
high speed. (in the LP/SLP modes only)
AUTO REPEAT PLAYBACK
PICTURE SEARCH
PLAYBACK FUNCTION
NORMAL PLAYBACK
STILL
PICTURE SELECT
This function enables you to improve the picture quality
when playing back worn cassettes such as rented
tapes.
1
Turn on the TV. Turn on the TV and set the TV
channel to 3 or 4. Now set the CH3/CH4 switch on
the back of the VCP to match the channel selected
on the TV.
2
Insert a prerecorded tape. The VCP will
automatically turn on and playback will start. If play
back does not start, press the PLAY button.
3
To set PICTURE SELECT.
Press the PICTURE SELECT
button repeatedly to select
NORMAL or SOFT or SHARP.
You can see the current setting
on the display.
4 To stop playback. Press the
STOP button.
[NORMAL]
[SOFT]
[SHARP]
AUTO REWIND
When a tape has reached the end during playback or
fast-forward, the tape will automatically rewind to the
beginning. After rewinding finishes, the VCP will eject
the tape and turn itself to off.
• This function is operative when Auto Repeat Playback
is set to off.
PLAYBACK
FUNCTION