Filter
Top Products
–
13
–
EN
SELECTING THE LANGUAGE
1 Plug in the unit power cord
Plug the unit power cord into a standard
AC outlet.
NOTE:
•
If any digits appear in the corner of
the screen, hit [STANDBY-ON] with-
out unplugging the power cord.
Make sure ...
•
Hit [STANDBY-ON] to turn on the unit.
NOTE:
•
This function effects only the language on the
screen menu and not the audio source.
2 Select “LANGUAGE”
Hit [SETUP] on the remote control.
Press
[
KK
/
LL
] to point to “LAN-
GUAGE”.
3 Select “ENGLISH”,“ESPAÑOL” or “FRANÇAIS”
Select “ENGLISH”, “ESPAÑOL”= Spanish or
“FRANÇAIS”= French using [ENTER].
4 Exit the Language mode
Hit [SETUP] to return to TV mode.
NOTE: If for some reason the menu is in Spanish or
French, press [
KK
/
LL
] to point to “IDIOMA
[ESPAÑOL]” or “LANGAGE [FRANÇAIS]”, then
hit [ENTER], then hit [SETUP] on the remote con-
trol.
TV
CHANNEL SET UP
Make sure ...
•
The unit must be turned on.
AUTO CHANNEL PROGRAMMING
As the initial setting, this unit has memorized all
channels, including the ones not available in your
area. This feature automatically puts only available
channels into the memory.
1 Select “CHANNEL SET UP”
Hit [SETUP] on the remote control.
Press
[
KK
/
LL
] to point to “CHAN-
NEL SET UP”.
Then hit
[ENTER].
2 Begin auto ch programming
Press [
KK
/
LL
] to point to “AUTO
CH PROGRAMMING”.
Then hit
[ENTER].
The tuner scans and memorizes all
the active channels in your area.
3 After scanning
The tuner stops on the lowest memorized channel.
•
When AUTO CH PROGRAM-
MING is activated where there is
no TV signal input, “NO TV SIG-
NALS” will appear on the display
after the completion of the chan-
nel scanning.
•
The unit may recognize CATV channels to be TV
channels by the receiving conditions. In this case,
try auto ch programming again in the fine receiv-
ing conditions.
•
Channel memory programming is NOT neces-
sary when connected to a cable box or satellite
box. Just select the channel for cable or satellite
input (Ex CH3) on this unit, then select your
desired channel on the cable box or satellite box.
SET UP FOR USE
TV SECTION
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
B LANGUAGE [ENGLISH]
CAPTION [OFF]
- TV SETUP -
B CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
– CHANNEL SET UP –
ADD / DELETE CH (CATV)
B AUTO CH PROGRAMMING
NO TV SIGNALS
TV