FUNAI MWC13D5 A TV DVD Combo User Manual


 
9
EN
COAXIAL
ANT.
3938
37
32. K / L / { / B Buttons
TV Mode:
[page 13]
Hit to select a setting mode from the menu on the
TV screen.
Hit to select or adjust from a particular menu.
DVD Mode: [page 20]
Press to select a menu item.
33. DISC MENU Button [page 20]
Displays the menus in the DVD.
34. SELECT Button [page 20]
Hit to change to TV mode, external input mode or
DVD mode.
35. MUTE Button [page 16]
Hit to turn off the sound portion of the TV program.
(Volume level display turns LIGHT RED from
LIGHT BLUE.) Hit it again or hit
[VOL. K / L] to
restore sound.
36. PICTURE Button [page 15]
Hit to enter picture adjustment mode.
37. Power cord
Connect to a standard AC outlet (120V/60Hz).
NOTE: Remove the power cord from the hook to
avoid breaking a wire before you connect to
a standard AC outlet.
38. COAXIAL Jack (DVD Audio Only)
[pages 11, 12]
Connect to the digital input of an external
amplifier or decoder.
39. ANT(ENNA). Jack
Connect to an antenna, cable system or satellite sys-
tem.
NOTE: When you select the DVD mode by this
button, press [PLAYB ] or [OPEN/CLOSE A]
first. Otherwise, the DVD features are not
operated.
17. SLEEP Button [page 16]
Hit to display the sleep timer and start the function.
The shut off time can be determined by the number
of times you hit this button. (0, 30, 60, 90 or 120
minutes)
18. h Button [page 21]
Hit to fast reverse the Disc. Hit [PAUSE F], then hit
this button to begin slow motion playback. Hit this
button repeatedly to change the reverse speed of
slow motion.
g Button [page 21]
Hit to fast forward the Disc. Hit [PAUSE F], then
hit this button to begin slow motion playback. Hit
this button repeatedly to change the forward speed
of slow motion.
19. V.SURR (VIRTUAL SURROUND) Button
[page 25]
Hit to set virtual surround on/off.
20. SETUP Button [pages 13, 27-29]
Hit to enter or exit the setup menu of TV or DVD.
21. TITLE Button [page 20]
Displays the title menu.
22. CLEAR Button [pages 22-23]
Resets a setting.
23. DISPLAY Button
TV Mode:
Hit to display the channel number on the screen. If
you hit it again, the channel number will disappear.
DVD Mode: [page 26]
Displays the current status on the TV screen.
24. SEARCH MODE Button [page 22]
Hit to locate a desired point.
25. AUDIO Button [page 24]
Hit to select a desired audio language or sound
mode.
26. SUBTITLE Button [page 24]
Hit to select a desired subtitle language.
27. REPEAT Button [page 23]
Repeats playback of the current disc, title, chapter
or track.
28. ANGLE Button [page 25]
Hit to change the camera angle to see the sequence
being played back from a different angle (if avail-
able).
29. REPEAT A-B Button [page 23]
Repeats playback of a selected section.
30. RETURN Button [page 22]
Returns to the previous screen in the setup menu.
31. ENTER Button [pages 13, 20]
Hit to accept a setting.
REAR VIEW
[Fig. 3]
INSTALLING THE BATTERIES
1)Open the battery compartment cover by pressing the
cover on the remote unit in the direction of the arrow.
2)Insert 2 “AA” penlight batteries into the battery
compartment in the direction indicated by the
polarity (+/-) markings.
3)Replace the cover.
NOTES:
¡Do not mix alkaline and manganese batteries.
¡Do not mix old and new batteries.