Filter
Top Products
6
DIP SWITCH GUIDELINES
Inside the 4x4 HDTV KVM Matrix is a bank of Dip Switches. Below is a table describing
their functions. By default, all switches are set to the Off position.
Dip Switch # Name Description
1 Switching Delay Adds a 3 second delay to switching
2 On Board EDID Feeds a Generic HDMI EDID to all Inputs
3 IR Code Dip Switch Corresponds to Dip Switch 1 on RMT16-IR
4 IR Code Dip Switch Corresponds to Dip Switch 2 on RMT16-IR
5 Unused
6 Unused
7 Unused
8 Edge Select +Edge Pixels
How to open the 4x4 HDTV KVM Matrix:
To access the dip switches, fi rst remove the 10 hex nuts on the back of the unit (8
located above each DVI port and 2 adjacent to the RS232 port). Remove the 5 Philips
screws under the unit and the 4 screws on each side of the unit. Now carefully remove
the cover of the 4x4 HDTV KVM Matrix.
1
2
3
4
5
6
7
8