Filter
Top Products
6
DIP SWITCH GUIDELINES
Inside the 4x4 HDTV Matrix is a bank of Dip Switches. Below is a table describing their
functions. By default, all switches are set to the Off position.
Dip Switch # Name Description
1 Switching Delay Adds a 3 second delay to switching
2 On Board EDID Feeds a Generic HDMI EDID (720p/1080i)
to all Inputs
3 IR Code Dip Switch Corresponds to Dip Switch 1 on RMT16-IR
4 IR Code Dip Switch Corresponds to Dip Switch 2 on RMT16-IR
5 Unused
6 Unused
7 Unused
8 Edge Select +Edge Pixels
How to open the 4x4 HDTV Matrix:
To access the dip switches, fi rst remove the 18 hex nuts on the back of the unit (16
located above each DVI port and 2 adjacent to the RS232 port). Remove the 5 Philips
screws under the unit and the 4 screws on each side of the unit. Now carefully remove
the cover of the 4x4 HDTV Matrix.
1
2
3
4
5
6
7
8