Filter
Top Products
9
DIP SWITCH FEATURES
The DIP switch feature panel is located on the underside of the HDMI to 3GSDI
Converter. Please use the diagram and chart below to confi gure the DIP switch
settings. Adjustments should be made with a small pointed object such as a
toothpick, a mechanical pencil with the lead retracted or a mini screwdriver.
DIP SWITCHES
Switch Description
OFF
(Factory Default)
On
1 Test pattern Off On
2 N/A N/A N/A
3 RGB Input Range 16-235(limited) 0-255 (full)
4 N/A N/A N/A
5
3G Mapping
(425M Level)
Direct (A) Dual Link (B)
6 N/A N/A N/A
7 N/A N/A N/A
8 N/A N/A N/A
DIP 1 - The color bar test pattern is in 720p (60Hz) format. No valid input is
necessary at the SDI connector to use the test pattern.
DIP 3 - The RGB Input Range switch is used to toggle between Limited-Range
RGB or Full-Range RGB: 16-235 or 0 - 255.
DIP 5 - Please note that some 3G-SDI equipment does not support both level
A and level B. Set this switch according to the supported 3G level of your SDI
equipment connected to the HDMI to 3GSDI Converter.