Filter
Top Products
5
1 Video Lock LED Indicator
This indicator will become active once the HDMI input signal has been locked.
2 3G LED Indicator
This indicator will become active when the output video stream is a 3G signal.
3 Power LED Indicator
This indicator will become active when power is being supplied to the unit via the
included 5V DC power adapter.
4 Locking 5V DC Power Receptacle
This input will accept power via the included locking 5V DC power supply.
Connect the power supply between this input and an open wall power socket.
5 USB Update Port
This port is used to update fi rmware. For current fi rmware releases, please see
the download section at www.gefen.com.
6 Analog RCA L+R Audio Ouput
This input will output the fi rst two (2) channels of analog audio extracted from
the digital HDMI input source on RCA style L+R analog audio connectors. The
primary purpose of these outputs is for monitoring purposes.
7 HDMI Input
This input will accept a single HDMI type A male cable. For acceptable input
formats please see page 2.
8 SDI Output Channel A
This output sends converted SD/HD/3G-SDI audio/video to a single SD/HD/3G-
SDI device using a user supplied SDI cable. Converted HDMI signals will be
output through this SDI port. For a full description of the supported A/V formats
on this output please see page 2.
9 SDI Output Channel B
This output sends converted SD/HD/3G-SDI audio/video to a single SD/HD/3G-
SDI device using a user supplied SDI cable. Converted HDMI signals will be
output through this SDI port. For a full description of the supported A/V formats
on this output please see page 2.
The converted HDMI signal will be output by default through this port (mirror
output of Channel A) unless the 3G-SDI Level B mode is selected and the input
video is 1080p 50/59/60Hz.
PANEL DESCRIPTIONS