Filter
Top Products
OPERATION
27
DVD Operation
Playing DVDs
Playback Setup
Turn on the TV and select the video input source con-
nected to the DVD+VCR.
Audio system: Turn on the audio system and select
the input source connected to the DVD+VCR.
Set the Output Source to DVD as shown in “Selecting
the Viewing Source” on page 6.
11
Press OPEN/CLOSE (
ZZ
) to open the disc tray.
22
Load your chosen disc in the tray, with the label
facing up.
When a double-sided DVD is inserted, make sure
the side you want to play is facing down.
33
Press OPEN/CLOSE (
ZZ
) to close the tray.
Playback starts automatically. If playback does not
start, press N (PLAY).
In some cases, the disc menu might appear
instead.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD which contains a menu.
Use b/B/v/V buttons to select the title/chapter you
want to view, then press ENTER to start playback.
Press TITLE or DISC MENU to return to the menu
screen.
otes
If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit password
must be entered and/or the disc must be authorized
(see Parental Control, on page 20).
DVDs may have a Region Code.
Your DVD+VCR will not play discs that have a Region
Code different from your DVD+VCR. The Region
Code for this DVD+VCR is 1 (one).
Do not keep a fixed image displayed on the screen
for a long time.
Screen Saver
The screen saver picture appears if you leave the
DVD+VCR in Stop mode for about five minutes.
Last Scene Memory
This player memorizes last scene from the last disc that
is viewed. The last scene remains in memory even if
you remove the disc from the player or switch off the
player. if you load a disc that has the scene memo-
rized,m the scene is automatically recalled.
ote
This player does not memorize the scene of a disc if
you switch off the player before commencing to play the
disc.
General Features
ote
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.
Selecting other TITLEs
When a disc has more than one title, you can select
another title as follows:
Press DISPLAY, then press the appropriate number
buttons (0-9) to select a title number.
Selecting other CHAPTERs
When a title on a disc has more than one chapter or a
disc has more than one track, you can select another
chapter as follows:
Press SKIP . or > briefly during playback to
return to the beginning of the
current chapter or to select the next chapter.
Press SKIP . twice briefly to step back to the pre-
vious chapter.
To go directly to any chapter during playback,
press DISPLAY. Use
vv
/
VV
to select Chapter icon.
Then, enter the chapter number with the number
buttons (0-9).
ote
For two-digit numbers, press the numbered buttons
(0-9) in rapid succession.
Slow Motion
1 Press PAUSE/STEP (X) during playback.
The DVD+VCR will now go into PAUSE mode.
2 Press BACKWARD (m) or FORWARD (M)
during pause mode.
The DVD+VCR will enter SLOW mode.
3 Use BACKWARD (m) or FORWARD (M) to select
the required speed: t 1/16, t 1/8, t 1/4, t 1/2
(backward), or T 1/16, T 1/8, T 1/4, T 1/2 (for-
ward).
4 To return to playback, press N (PLAY).
DVD
1 /12
DVD
1 /3
DVD
DVD
DVD