Go-Video DV2130 DVD Player User Manual


 
54
When VHS playback is stopped, press the SEARCH/IDX button to
display a list of search options. The DVD+VCR uses the VISS (VHS
Index Search System) standard to locate index marks placed at the
start of all video recordings. This system may not recognize index
marks made by old VCRs. If the VCR has trouble finding a mark, it
is probably because the cassette was recorded on a VCR without
VISS. If you want to index two programs in a row, set your VCR to
Stop mode, then start recording the next program. PAUSE has no
effect on index marks.
1 Return to (0:00:00)
Use this feature when you want to search for counter position
0:00:00 on your videotape. To set the counter to 0:00:00, press the
CLEAR button at the desired point on the tape. While the tape is
stopped, simply press the ENTER button. The VCR will
automatically rewind or fast forward to 0:00:00 and then stop at
that position.
2 Blank Search
Use this feature when you want to search for a blank position to
record a program on a videotape. While the tape is stopped, press
the ENTER button. The VCR will fast forward, searching for a blank
position, and then automatically stop at that position. If the VCR
reaches the end of the tape during a Blank Search, the tape will be
ejected.
3 Scan and Play
Use scan and play when you don’t know exactly where a program
is located on a cassette tape.
- Forward Intro Scan
Highlight “Forward Intro Scan”, then press the ENTER button.
- Reverse Intro Scan
Highlight “Reverse Intro Scan”, then press the ENTER button.
Variable Search System
Forward
Reverse
Return to
Blank Search
CLEAR
LAST CH REPEAT
+
DISC MENU
SUBTITLE MODE ANGLE MARK
REC
SP/SLP
TIMER SEARCH/IDX