Filter
Top Products
30
DVD Operation (Continued)
General Features (Continued)
Marker Search
You can start playback from a bookmarked point on
your disc. Up to nine points can be memorized.
To enter a mark, follow these steps.
1 During disc playback, press MARK when playback
reaches the point you want to bookmark.
The Marker icon appears briefly on the TV screen.
2 Repeat step 1 to enter up to nine Marker points on a
disc.
To Recall a Marked Scene
1 During disc playback, press SEARCH.
The Marker Search menu will appear on the screen.
2 Within 10 seconds, use the 1/2 or number buttons to
select the Marker number you want to recall.
3 Press ENTER.
Playback will start from the Marked scene.
4 To exit the MARKER SEARCH menu, press
SEARCH.
To Clear a Marked Scene
1 During disc playback, press SEARCH.
The Marker Search menu will appear on the screen.
2 Within 10 seconds, use the 1/2 or number buttons to
select the Marker number you want to erase.
3 Press CLEAR.
The Marker number will be erased from the list.
4 Repeat steps 2 and 3 to erase additional Marker
numbers.
5 To exit the MARKER SEARCH menu, press
SEARCH.
All markers are erased when the disc is ejected.
Changing Video Mode
With certain DVDs, the picture may flicker or “dot
crawl” may be visible on straight lines. This may be
due to the vertical interpolation or de-interlace not
being perfectly matched with the disc. If so, the pic-
ture quality may be improved by changing the Video
Mode.
To change the Video Mode, press and hold DISPLAY
for about 3 seconds during disc playback. The new
Video Mode number selected is displayed on the TV
screen. Check whether the video quality has
improved. If not, repeat the above procedure until pic-
ture quality is improved.
Video Mode change sequence:
MODE1 → MODE2 → MODE3 → MODE4 →
MODE5 → MODE1, etc.
If you turn off the power, the Video Mode will revert to
MODE1.
Special DVD Features
Checking the contents of DVD Video
discs: Menus
DVDs may contain menus that allow you to access spe-
cial features. To use the disc menu, press DISC MENU.
Then, press the appropriate number button to select the
desired option. You can also use the b/B/v/V buttons
to highlight your selection, then press ENTER.
Title Menu
1 Press TITLE.
If the current title has a menu, the menu will appear on the
screen. Otherwise, the disc menu may appear.
2 The Title menu may list camera angles, audio lan-
guages, subtitle options, chapters, etc.
3 To remove the title menu, press TITLE again.
Disc Menu
1 Press DISC MENU.
The disc menu is displayed.
2 To exit the disc menu, press DISC MENU again.
Camera Angle
If the disc contains sequences recorded from different
camera angles, the angle icon blinks on the TV screen.
You can then change the camera angle if you wish.
Press ANGLE repeatedly during playback to select
the desired angle.
The number of the current angle appears on the display.
Changing the Audio Language
Press AUDIO repeatedly during playback to hear a
different audio language or audio track.
Subtitles
Press SUBTITLE repeatedly during playback to see the
different subtitle languages.
ote
If appears, the feature is not available on the disc.
1 ENG
DVD
1 ENG
D
5.1CH
DVD
1/1
DVD
DVD
DVD
DVD
MARKER SEARCH
1/9
DVD