The power cord is disconnected.
Plug the power cord securely into the
The TV is not set to receive DVD+VCR
Select the appropriate video input
on the TV so the picture from the
DVD+VCR appears on the TV screen.
The video cable is not connected
Connect the video cable securely.
The TV power is turned off.
Unit is in Progressive Scan mode.
Press and hold the P.SCAN button
for 5 seconds while in Stop mode to
switch to Interlace Scan mode.
The equipment connected with
the audio cable is not set to receive
Select the correct input mode on the
audio receiver so you can listen to
the sound from the DVD+VCR.
The audio cables are not connected
Connect the audio cable securely.
The power of the equipment
connected with the audio cable is
Turn on the equipment connected
The audio cables are damaged.
Audio settings are incorrect in the
Check the Digital Out setting; see
No disc/tape is inserted.
Insert a disc or tape. Check that the
disc/tape indicator on the front panel
An unplayable disc is inserted.
Insert a playable disc. Check the disc
type, color system, and regional code.
The disc is placed upside down or is
not placed within the guide.
Place the disc with the playback side
The Parental Control is set.
Cancel the Parental Control function
or change the rating level.
The Troubleshooting section below will help you solve common issues with your
DVD+VCR. If you don’t fi nd the answers you need here, you can contact our Customer
Service Department as follows:
customersupport@govideo.com
