Filter
Top Products
20
Initial Setup (Continued)
TV Aspect
4:3 Letterbox: Select when a standard 4:3 TV is con-
nected. Displays theatrical images with masking bars
above and below the picture.
4:3 Fullscreen: Select when a standard 4:3 TV is con-
nected. Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
16:9 Widescreen: Select when a 16:9 widescreen TV
is connected.
Progressive Scan
Progressive Scan Video provides the highest picture
quality with reduced flickering.
• If you are using the COMPONENT/PROGRESSIVE
VIDEO OUT jacks, but are connecting the DVD
Recorder+VCR to a standard (analog) television, set
Progressive Scan to OFF.
• If you are using the COMPONENT/PROGRESSIVE
VIDEO OUT jacks for connection to a TV or monitor
that is compatible with a Progressive Scan signal, set
Progressive Scan to ON.
Caution
Once the setting for Progressive Scan output is entered,
an image will only be visible on a Progressive Scan
compatible TV or monitor. If you set Progressive Scan
to ON in error, you must reset the DVD Recorder+VCR.
First, remove the disc in the DVD Recorder+VCR. Next,
press STOP (
x) and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting, and a picture will once again be visible
on a conventional analog TV or monitor.
Factory Setting
If you wish, you can reset the DVD Recorder+VCR to
its original factory settings. Select “SET” then press
ENTER.
The Initialize menu will appear. Use the
b B buttons to
select “Yes” and press ENTER.
ote
Some options cannot be reset, including Movie Rating,
Password, and Country Code.
LANGUAGE Settings
Display Menu Language
Select a language for the DVD Recorder+VCR Setup
menu and on-screen displays.
Disc Menu/Audio/Subtitle Language
Select your preferred language for Disc Menus,
Audio
soundtracks, and Subtitles.
Original: The disc’s default language is selected.
Other: To select another language, select Other then press
ENTER. Use the 0-9 and ENTER buttons to input the corre
-
sponding 4-digit number according to the “Language Code
List” on page 59. If you a mistake before pressing ENTER,
press b to move the cursor back and correct it.
Tuning Band
A
uto Channel Set
CH. Add/Del
Clock Set
TV Aspect
Progressive Scan
Factory Setting
ON
O
FF
Prev. Select Close
Tuning Band
A
uto Channel Set
CH. Add/Del
Clock Set
TV Aspect
P
rogressive Scan
F
actory Setting
4
:3 Letterbox
4
:3 Fullscreen
16:9 Widescreen
P
rev.
S
elect
C
lose
T
uning Band
A
uto Channel Set
CH. Add/Del
Clock Set
T
V Aspect
Progressive Scan
F
actory Setting
S
ET
P
rev.
S
elect
C
lose
No
It initializes the system status.
Proceed?
Yes
Display Menu
D
isc Menu
D
isc Audio
D
isc Subtitle
English
Prev. Select Close
Display Menu
Disc Menu
Disc Audio
Disc Subtitle
English
French
Spanish
Italian
Japanese
Chinese
Other
- - - -
Original
Prev. Select Close