GPX TD910B TV DVD Combo User Manual


 
GPX | TD910B8 CUSTOMER HELPLINE | 1-314-621-2881 GPX | TD910B 9
AC Power
DC Car Power
Remote Control
RF Antenna
Car Seat Strap
Included TV Stand
SETUP
Plug the included AC/DC adapter
into the POWER INPUT and a
standard AC power outlet to power
the TV with DVD Player.
Plug the included DC car adapter
into the POWER INPUT and a DC
car power outlet to power the TV
with DVD Player.
Requires one CR2025 battery (pre-
installed)
Connect the included RF antenna
to the RF INPUT, and place the RF
antenna in an open area or near a
door or window.
If you are experiencing issues
receiving television channels, adjust
the position of the RF antenna to
improve channel reception.
1 Connect the CAR SEAT MOUNT
BRACKET to the back of the TV
with DVD Player.
2 Run the CAR SEAT STRAP
through the CAR SEAT MOUNT
BRACKET as shown in the
images to your left.
3 Wrap the slack at the top and
bottom of the CAR SEAT STRAP
around the headrest of the car
seat.
4 Tighten the CAR SEAT STRAP to
ensure a firm hold on the car seat.
Connect the included TV stand to the
bottom of the TV with DVD player as
shown in the image to your left.
The stand can be removed by
holding down the TV stand and
pulling up on the TV with DVD player.
WARNING: Do not hold, carry, or
move the TV with DVD player by
the TV stand only. Always grab a
hold of the main unit firmly when
moving.
CR2025
+