Filter
Top Products
-6- G1014Z Combination Sander
Contents of the Bolt Bag
QTY. DESCRIPTION
LOCATION
16
5
⁄
16''-18 x
1
⁄
2'' Carriage Bolts
Stand
16
5
⁄
16'' Flat Washers
Stand
16
5
⁄16''-18 Hex Nuts
Stand
4
5
⁄16''-18 x
1
⁄2'' Hex Bolts
Stand/Base
4
5
⁄
16'' Flat Washers
Stand/Base
4
5
⁄16''-18 x 1'' Hex Bolts
Stand /Feet
8
5
⁄16'' Flat Washers
Stand /Feet
4
5
⁄16''-18 Hex Nuts
Stand /Feet
In the event that any non-proprietary parts are
missing (e.g. a nut or a washer...), we would be
glad to replace them, or, for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.
Unpacking
The Model G1014Z Sander is shipped from the
manufacturer in a carefully packed carton. If you
discover the machine is damaged after you’ve
signed for delivery, please call our Customer
Service number immediately for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise filing a freight claim can be difficult.
Caution: The G1014Z is a heavy machine (120
lbs. shipping weight). DO NOT over-exert your-
self while unpacking or moving your machine –
get assistance. In the event that your Sander
must be moved up or down a flight of stairs, be
sure that the stairs are capable of supporting the
combined weight of people and the machine.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
Piece Inventory
After all the parts have been removed from the
container, you should have:
1 Sanding Unit
1 Sanding Belt
1 Sanding Disc
1 Cast Iron Disc
1 Idler Roller
1 Back Stop
1Miter Gauge
1 Work Table
1 Table Support Rod
4 Stand Legs
4 Upper Stand Braces
2 Lower Stand Braces
4 Rubber Feet
1 Quick Release Handle
1 Dust Port
1 Idler Roller Guard
1 Bolt Bag