Filter
Top Products
Introduction
The Model G1014ZX is the same sander as the
Model G1014Z with the addition of the cabinet
stand. Please use the included G1014Z manual
for reference and for ordering parts that are not
listed on the back of this insert.
Assembly
1. Insert
5
⁄16-18 x 1" hex bolts into each of the
rubber feet.
2. Secure the rubber feet to the bottom of the
cabinet stand with
5
⁄16" flat washers and
5
⁄16-
18 hex nuts.
3. With the help of an assistant, place the sand-
ing unit on the top of the cabinet stand and
attach it with
5
⁄16-18 x
1
⁄2" hex bolts and
5
⁄16"
flat washers.
4. Plug the motor power cord into the power
cord protruding from the back of the cabi
-
net.
5. Complete the rest of the assembly and
adjustments as explained in the G1014Z
manual.
Manual Insert
Model G1014ZX
Combination Sander
Figure 1. Model G1014ZX.
COPYRIGHT © MAY, 2005. BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#EW7245 PRINTED IN TAIWAN