Grizzly G8144Z TV Video Accessories User Manual


 



Blade Welding

       

 

    

        

       
      



The electric current that flows through the
blade welder during operation could cause
serious personal injury or death. To avoid
the risk of electrocution, never touch any
metal part of the welding station during
blade welding or annealing.
To weld the ends of bandsaw together:
1. OFF
2.        
       
Figure
32
Figure 32.

Note: To make a proper blade weld, the ends
of the blade must be evenly butted together
during the welding process. If necessary, use
the grinder to square up the ends or remove
any teeth that are in the welding zone (see
Figures 33–34).
Figure 33.

Welding Zone
Grind Off
Figure 34.
