Grizzly G8144Z TV Video Accessories User Manual


  Open as PDF
of 72
 



9.        
     

10. 
        
Figure 38
Correct
Not Correct
Not Correct
Correct
Not Correct
Figure 38.
Step
11

Step 2
11. 

12.        
      

Note: The welding operation has left the
blade joint brittle. Annealing will allow the
material to cool in gradual manner, giving the
weld strength and flexibility.
13. 


14.  Step 13     
        

Correct
Not Correct
Not Correct
Correct
Not Correct
Figure 39.

15.        

16. 
  

Note: Make sure not to grind the teeth or
blade body, or overheat the blade during
grinding—this will weaken the blade.
17.       
  Step 13

18. 


     Figure
39
NOTICE
For good metal-to-metal contact between
the welding clamps and the blade, make
sure the blade material and the clamps are
free from any debris or flash before each
use.
 previous next