Filter
Top Products
Wide Screen Display
The TV can be visualized in different formats
according to the broadcast made. Pressing
( )
button, selecet the features Letterbox, Subtitle,
Automatic,16:9 ,14:9 and 4:3.
Attention Please: When the MENU button is
pressed, the menu will change as it is visualized
on the screen. This condition ensures that the
menus do not extend beyond the borders of the
visualized parts of the screen.
14:9
This is the movie format.
Letterbox
While watching a ‘’Letter box
formatted’’ film / video cassette,
this setting will eliminate or
minimize the black stripes on
the background by zooming in
the picture and without diffusing
it.
Subtitle
If the subtitles are transmitted
in the ‘’letterbox formatted’’
broadcast, then this setting will
push the picture upwards in
order to ensure the entire written
text to be visualized.
Automatic
Some movie channels might
broadcast in the 16:9 format. If
you would like to see this format
automatically, then select
AUTOMATIC. In that case, the
mark AUTO 16:9 appears on
your screen.
16:9
Please use this setting for
watching the broadcasts in wide
screen DVD, wide screen
picture video cassette or 16:9
format. Since various screen
formats such as 16:9, 14:9, 20:9
etc. are used, black stripes
might be formed on the lower
and upper parts of the screen.
4:3
Use this setting to watch the
broadcasts in the 4:3 format.
Since the use of certain functions in order to change
the picture sizes for collective display or commercial
purposes (modifying the height and width etc.) will be
deemed an infringement of the picture copyrights, penal
procedure can be carried out as required by the relevant
laws.
Picture Set up:
Enter the Image menu by pressing the
button (
) on your remote control. Using
the upwards/downwards direction
buttons (
)/( ), you can select
whichever setting title you would like
and adjust their levels with the Right/left
direction (
)/( ) buttons.
The picture brightness, contrast, color
intensity and Sharpness levels can all
be adjusted according to your desire.
The changes you have made in the
image settings shall be stored in the
memory with no need for further
operation. DNR: You may reduce the
interference and noise formed in the
image by using this feature. Set it to
On to activate the feature.
Smart picture: You can select one of the non-
adjustable default settings in the
memory (Picture Mode) by pressing the
“
“ button on your remote control. Soft,
Natural and Rich are default values; the
user, however represents the values
you saved in memory.
Picture Format: You can visualize the broadcast
picture you watch in this option in a
format of your choice. You can visualize
them in the Automatic, 16:9 14:9,
Subtitle, Letterbox and 4:3 formats. The
picture format or 16:9 or 4:3 formats
can be selected in the COMP/HDMI/PC
modes. Besides, the picture will appear in the
16:9 format when the PIP is on or while in the
positions TXT-TXT/MIX. You can perform the
same process via the ”
“ format selection button
found on your remote control without entering
the picture menu. In that case, the prompt 16:9
or 4:3 appears in the centre of the screen.
Tint: When NTSC video is entered via Scart,
you may make the Colour Tone setting. The tint
option is not seen in the menu when you have
not entered such type of a video. When a NTSC
video is connected via the Scart, this option
becomes active and it is viewed in the menu.
MENU
PICTURE
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
COLOUR TEMPERATURE
SELECT
EXIT
MENU
NORMAL
ENGLISH -16-