Grundig GLCD4000HD, GLCD4600HD Flat Panel Television User Manual


 
42
Teletext
Block / group / page selection
1. With the blue button you can progress from block to
block.
2. Use the yellow button to proceed to the next group with
automatic overflow to the next block.
3. With the green button you can proceed to the next
existing page with automatic overflow to the next
group.
Alternatively the
D
button can be used.
4. The red button permits to return to previous selection.
Alternatively the
E
button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can
select a page by entering it as a three digit number using
the NUMBER buttons in TOP mode.
FASTEXT
The teletext pages are colour coded along the bottom of
the screen and are selected by pressing the correspond-
ing coloured button.
Special teletext functions
SCAN
Press this button to display concealed information, such as
solutions of riddles or puzzles.
Press this button again to remove the information from the
display.
SIZE
Selects double height text.
Press this button to enlarge the top half of the page.
Press this button again to enlarge the bottom half of the
page.
Press this button again to return to the normal display.
Stops the automatic page change which will occur if a tele-
text page consists of 2 or more sub pages. The number of
sub pages and the sub page displayed is, usually, shown
on the screen below the time. When this button is pressed
the stop symbol is displayed at the top left-hand corner of
the screen and the automatic page change is inhibited.
To continue press this button again.
PAP
Displays the teletext pages superimposed on the TV pic-
ture.
To switch the TV picture off press this button again.
-
/
--
In the teletext mode, press this button to select a sub page
number. The sub page number is displayed at the bottom
of the screen. To hold or change the sub page, press the
RED / GREEN,
D
/
E
or NUMBER buttons.
Press this button again to exit this function.