Filter
Top Products
Getting Started
Switching On for the First Time
Ensure all connections have been made following the diagrams on the previous
pages for reference.
To switch on the set top box, press the button on the set top box.
(To turn the set top box to standby mode, press button on the remote control).
Switch on the TV and select the AV programme channel(EXT,AV, External Source
or similar). Your set top box will automatically scan.
Scan finished will display for a moment on TV after all stations are found and
automatically stored. If you want to scan again, follow the procedure below:
Press MENU button on the remote control, the set top box main menu will display.
Select the Channel Setting menu by using the arrow buttons on the
remote control.
Press the button when the Channel Setting menu is highlighted.
Press button again when Channel Search is highlighted.
OK
OK
1010
1. Channel setting
System Setting
Confirm
OK
Exit
Channel Search
Confirm
Exit
OK
C
S
Search Type
Channel No:
Bandwidth
Encrypted Service
Update Mode
Manual Scan
8M
Not Save
Append
Start Search
Quality:
Strength:
50%
50%