Filter
Top Products
12
Picture settings
1 Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2 Select »Picture« with »P+« or »P-« and confirm with »OK«.
– The »Picture« menu appears.
3 Select »Default settings« with »P+« or »P-« and the setting
»User« with »
Ǹ
« or »
Ƿ
«.
4 Select »Brightness«, »Contrast«, »Colour«, »Sharpness« or
»Noise reduction« with »P+« or »P-« and press »OK« to con-
firm.
Note:
The setting »Hue« only applies to NTSC programmes (e.g. for
playback of American television programmes on the video
recorder).
5 Press »
Ǹ
« or »
Ƿ
« to select the level, and then press »OK« to
confirm.
6 Press »
i« to finish the settings.
Audio settings
1 Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2 Select »Sound« with »P+« or »P-« and confirm with »OK«.
– The »Sound« menu appears.
Volume
1 Select »Volume« with »P+« or »P-« and adjust the setting with
»
Ǹ
« or »
Ƿ
«.
Balance
1 Select »Balance« with »P+« or »P-« and adjust the setting with
»
Ǹ
« or »
Ƿ
«.
Stereo / two channel, mono
If the device receives two channel programmes, e.g. a film with the
original sound on sound channel B (display: »Dual B «) and the
dubbed version on sound channel A (display: »Dual A«), you can
select the sound channel you desire.
If the device receives stereo or Nicam programmes, it switches
automatically to stereo sound (display: »Stereo«).
You can switch the sound to »Mono« if the stereo reception
quality is poor.
1 Select »Sound type« with »P+« or »P-« and adjust the setting
with »
Ǹ
« or »
Ƿ
«.
SETTINGS
______________________________________________
Picture
Select Back
and edit Exit
●
OK
Brightness 39
Contrast
Colour
Sharpness
Hue
Noise reduction Sharp
UserPicture smart
Sound
Select Back
and edit Exit
Volume 0
Balance
Sound type
Effect
AVL
Equalizer
On
Normal
Stereo
Headphones
To Page 2